UTM to Maidenhead Locator Converter
Convert coordinates from UTM to Maidenhead locator instantly as you type, one at a time or a whole list at once.
Input
Output
Readme
What are these coordinate formats?
A place on the Earth has a latitude, how far north or south of the equator it is, and a longitude, how far east or west of the prime meridian it is. Both are angles in degrees, which the converters write in three ways. Decimal degrees use one number each, with a minus sign for south and west. DMS splits each angle into degrees, minutes and seconds, where 1° = 60′ and 1′ = 60″. DDM uses degrees and minutes with decimals.
Grids and location codes write a place in other ways:
- UTM splits the Earth into 60 zones, numbered from west to east, and latitude bands, lettered from C in the south to X in the north. It gives a place as its zone and band, then its easting and northing in meters.
- MGRS is built on UTM. It names the grid zone, then a 100 km square with two letters, then the easting and northing inside that square. Around the poles, where UTM stops, it uses the UPS grid, with the letters A and B in the south and Y and Z in the north.
- Plus codes, also called Open Location Codes, and geohashes write a place as a short code of letters and digits. Each character narrows down the area the code stands for.
- Maidenhead locators, also called QTH locators, write a place as pairs of characters: a field, a square, a subsquare, and so on.
- OS grid references use the Ordnance Survey's National Grid of Great Britain: two letters for a 100 km square, then the easting and northing inside it.
Here is the same place in London in each format:
| Format | Example | What the values are |
|---|---|---|
| Decimal degrees | 51.500729, -0.124625 |
Latitude and longitude in degrees, negative to the south and west |
| DMS | 51°30'02.62"N 0°07'28.65"W |
Degrees, minutes and seconds, with N or S and E or W |
| DDM | 51°30.044'N 0°07.478'W |
Degrees and minutes with decimals, with N or S and E or W |
| UTM | 30U 699566 5709431 |
Zone and latitude band, then easting and northing in meters |
| MGRS | 30U XC 99565 09430 |
Grid zone, 100 km square, then easting and northing in that square |
| Plus code | 9C3XGV2G+75 |
An area of the plus code grid |
| Geohash | gcpuvpmm2p8 |
A cell of the geohash grid |
| Maidenhead locator | IO91wm |
Field, square and subsquare |
| OS grid reference | TQ 30268 79643 |
100 km square, then easting and northing in that square |
Tool description
Every coordinate converter here converts between all nine formats and works the same way, from the general Coordinate Converter to the ones for a single pair, such as DMS to decimal degrees, UTM to MGRS, or plus code to decimal degrees: each starts on the formats in its name, and the Source and Target menus switch to any other. Paste one coordinate, or a whole list with one per line. The result appears as you type, ready to copy. Each line of the result is the same line of the input converted, and blank lines stay blank, so the rows stay lined up with the ones you pasted. The swap button turns the conversion around and makes the result the new input.
When a line can't be converted, the error says what's wrong with it, and in a list, which line it's on. Coordinates are converted in your browser.
Examples
| Source | Input | Target | Result |
|---|---|---|---|
| DMS | 40°42'46.08"N 74°00'21.60"W |
Decimal degrees | 40.712800, -74.006000 |
| Decimal degrees | -33.8688, 151.2093 |
DMS | 33°52'07.68"S 151°12'33.48"E |
| DDM | N 40° 42.768 W 074° 00.360 |
DMS | 40°42'46.08"N 74°00'21.60"W |
| Decimal degrees | 40.7128, -74.0060 |
DDM | 40°42.768'N 74°00.360'W |
| Decimal degrees | 40.7128, -74.0060 |
UTM | 18T 583959 4507351 |
| UTM | 56H 334369 6250948 |
Decimal degrees | -33.868803, 151.209304 |
| UTM | 18T 583959 4507351 |
MGRS | 18T WL 83959 07351 |
| MGRS | 18T WL 83959 07350 |
UTM | 18T 583959 4507350 |
| Decimal degrees | 90, 0 |
MGRS | Z AH 00000 00000 |
| Decimal degrees | 40.7128, -74.0060 |
Plus code | 87G7PX7V+4J |
| Plus code | 87G7PX7V+4J |
Decimal degrees | 40.712813, -74.005938 |
| Geohash | dr5regw3ppy |
Decimal degrees | 40.712799, -74.006000 |
| Decimal degrees | 59.91, 10.75 |
Maidenhead locator | JO59jv |
| OS grid reference | TQ 30268 79643 |
Decimal degrees | 51.500725, -0.124619 |
| Decimal degrees | 55.9533, -3.1883 |
OS grid reference | NT 25897 74001 |
A list converts line by line. These decimal degrees:
40.7128, -74.0060
51.500729, -0.124625
-33.8688, 151.2093become this UTM:
18T 583959 4507351
30U 699566 5709431
56H 334369 6250948What you can paste
- Decimal degrees, DMS and DDM: whichever of the three is the source, the converters read all three, so
40.7128, -74.0060,40°42'46.08"N 74°00'21.60"WandN 40° 42.768 W 074° 00.360are the same place.- The latitude comes first, unless the letters N, S, E and W say otherwise, as in
74.006 W 40.7128 N. The letters can go before the latitude and the longitude, as inN 40.7128 W 74.006, or after them. - A comma, a semicolon, a space or a tab can separate the latitude and the longitude.
- Degrees, minutes and seconds can be marked with
°,'and", with′and″, with the lettersd,mands, or with colons, as in40:42:46.08N 74:00:21.6W. Spaces alone work too:40 42 46.08 N 74 0 21.6 W. - Decimal commas work when a space or a semicolon separates the latitude and the longitude:
40,7128 -74,0060or40,7128; -74,0060. - A third number, such as a height, a label such as
Lat:, and hemisphere letters other than N, S, E and W show an error.
- The latitude comes first, unless the letters N, S, E and W say otherwise, as in
- UTM: the zone, from 1 to 60, then the latitude band, from C to X, or the hemisphere as
N,S,northorsouth, then the easting and the northing in meters.18T 583959 4507351,18 north 583959 4507351andzone 18T 583959mE 4507351mNall work. Results always have the latitude band. - N and S in UTM: N always means north of the equator. S is both latitude band S, from 32°N to 40°N, and the southern hemisphere. It's read as band S when the easting and northing are in band S, so
54S 388433 3949290is35.681200, 139.767096, and as the southern hemisphere otherwise, so56S 334369 6250948is-33.868803, 151.209304. Some eastings and northings fit both, such as those of21S 441138 4272240, which reads as band S. For a place south of the equator, write its latitude band, from C to M, or the word south:21F 441138 4272240or21 south 441138 4272240. - MGRS: with or without spaces, in any case, with 0 to 10 digits, half for the easting and half for the northing.
18TWL8395907350is a 1 m square,18T WL 8307a 1 km square, and18TWLthe whole 100 km square. References around the poles start with A, B, Y or Z. - Plus codes: full codes of any length, in any case, padded ones such as
87G70000+too. A short code such asPX7V+4Jleaves out the start of the full code and needs a nearby place to find it, which the converters can't look up, so enter the full code, like87G7PX7V+4J. - Geohashes: up to 12 characters, in any case.
- Maidenhead locators: 2, 4, 6, 8 or 10 characters, in any case, such as
FN20orFN20xr. - OS grid references: two letters and up to 10 digits, with or without spaces, such as
TQ 30268 79643,TQ3026879643orTQ 302 796, or the easting and northing in meters, such as530268, 179643.
How it works
Each line is read into a latitude and longitude, then written in the target format. Latitudes and longitudes are read and written on the WGS 84 datum, the model of the Earth they're measured on, and so are UTM, MGRS, plus codes, geohashes and Maidenhead locators. OS grid references are on another datum, OSGB36. The converters go between OSGB36 and WGS 84 with a Helmert transformation, not the Ordnance Survey's OSTN15 grid, so their OS grid references can differ slightly from those of the Ordnance Survey's own conversion.
Results are written like this:
- Decimal degrees with 6 decimals, the latitude first.
- DMS with the seconds to 2 decimals, 0.01″, and DDM with the minutes to 3 decimals, 0.001′.
- UTM with the easting and northing rounded to 1 m.
- MGRS and OS grid references to 1 m, with 5 digits each for the easting and the northing. The digits are cut off rather than rounded, as both systems have it, so
40.7128, -74.0060is18T 583959 4507351in UTM but18T WL 83959 07350in MGRS. - Plus codes with 10 digits, an area 1/8000° on each side.
- Geohashes with 11 characters, so decimal degrees converted to a geohash and back change by 1 in the 6th decimal at most.
- Maidenhead locators with 6 characters: the field, the square and the subsquare, 5′ of longitude by 2.5′ of latitude.
A grid square or a code stands for an area, and converts to the center of it. So converting a place to a code and back gives the center of the code's area, not the place: 40.7128, -74.0060 is FN20xr, and FN20xr converts to 40.729167, -74.041667. A shorter code or reference stands for a larger area, and converts to the center of that.
UTM covers latitudes from 80°S to 84°N, and a place outside that range shows an error. MGRS goes on to the poles. UTM and MGRS convert to each other directly, without going through degrees, so the meters don't change: 18T WL 83959 07350 becomes 18T 583959 4507350. An MGRS reference with fewer digits converts to the center of its square: 18TWL8307 becomes 18T 583500 4507500.
Tips
- To convert the latitude and longitude columns of a spreadsheet, copy both columns at once. Spreadsheet apps copy the cells of a row with a tab between them, which the converters read, and blank rows stay blank in the result, so you can paste it back next to the columns.
- Without N, S, E and W, the first number is always the latitude, so
-74.0060, 40.7128converts as latitude -74.006. When your coordinates have the longitude first, swap the columns, or add the letters:74.006 W 40.7128 N. - For the larger square around a place, drop the same number of digits from the end of the easting and the northing of an MGRS or OS grid reference:
TQ 302 796is the 100 m square that holdsTQ 30268 79643. Characters dropped from the end of a geohash, or pairs from the end of a Maidenhead locator, work the same way.