What it does

It reads the QR code of a Matter smart home device from a photo, screenshot or scan of its label, box or manual, and decodes the setup code inside: the vendor and product IDs, the discriminator, the setup passcode, the commissioning flow, the ways the device can be found and the manual pairing code you can type into an app instead of scanning.

How to use it

Pick an image, or paste a screenshot anywhere on the page. On a phone, the file picker can take a photo with the camera. Every QR code in the image is read; one that isn't a Matter code is shown as text, so you can see what it holds.

If no code is found, crop the photo to the label, take it closer and make sure it's sharp, and avoid glare on glossy stickers.

What you see

  • Status: whether a Matter code was found.
  • QR code text: the code as text, starting with MT:. The Matter Pairing Code Decoder reads this text too, if you want to type a code instead.
  • Vendor ID and Product ID, in decimal and in hex. Vendor IDs 0xFFF1 to 0xFFF4 are test vendor IDs.
  • Discriminator and Setup passcode: what an app uses to find the device and to prove it may add it.
  • Commissioning flow: Standard, User action required (press a button or follow the manual first) or Custom (the steps are in the manufacturer's entry in the Distributed Compliance Ledger).
  • Manual pairing code: the digits printed next to the QR code, worked out from the QR code.
  • Discovery methods: Bluetooth LE, already on the IP network, Wi-Fi Public Action Frame, NFC, Thread, or Wi-Fi Soft-AP on older devices.
  • Extra data: a serial number, a commissioning timeout and other optional fields that some QR codes carry.

Privacy

The image is read in your browser and never uploaded. A setup code lets anyone nearby add the device while it's waiting to be set up, so don't post photos of a real label.